ATEN CE-300 User Manual download pdf (Page 18)

Installation

Setting up the KVM Extender System is simply a matter of plugging in the

cables (numbers on the following installation diagram correspond with these

steps):

1. Ensure that all equipment to be connected is powered off.

2. Connect the local console devices (mouse, keyboard, monitor,

microphone and speakers) to the ports on the rear of the Local Unit

(CE-300L).

3. Plug the connectors on the provided KVM cable into the appropriate

connectors on the front of the CE-300L. Each connector is marked with

an identifying icon.

4. Plug the connectors on the other end of the KVM cable into the

appropriate ports on the computer system (or Console section of the KVM

switch - if you are using one). Each connector is marked with an

identifying icon.

5. Connect one end of a Category 5 twisted pair cable to the Remote I/O port

on the CE-300L.

6. Connect one of the provided power adapters into an AC source; connect

the adapter’s power cable to the Power Jack on the CE-300L.

7. Plug the other end of the Category 5 twisted pair cable into the Remote

I/O port on the CE-300R.

8. Connect the remote console devices (mouse, keyboard, monitor,

microphone and speakers) to the ports on the rear of the Remote Unit

(CE-300R).

9. Connect the other provided power adapter into an AC source; connect the

adapter’s power cable to the Power Jack on the CE-300R.

2005-10-31

CE-300 User Manual

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

No comments

ATEN CE-300 User Manual Page 18