ATEN CE-700 User Manual download pdf (Page 9)

- 9 -

Installation

Setting up the CE-700 KVM Extender system is simply a matter

of plugging in the cables. Refer to the installation diagram on the

following page and do the following:

1. Make sure that all the equipment to be connected up is

powered Off.

2. Plug the cables from the local console devices (mouse,

keyboard, monitor), into their ports on the Console side of the

Local Unit (CE-700L).

3. Plug the appropriate connectors on the USB KVM cable

supplied with this unit into the CPU side of the CE-700L. Each

connector is marked with an appropriate icon to indicate

which it is.

Note: The female monitor connector is the one that plugs into

the CE-700L.

4. Plug the connectors on the other end of the cable into the

appropriate ports on the computer (or Console section of the

KVM switch - if you are using one). Each connector is marked

with an appropriate icon to indicate which it is.

5. Plug either end of the Cat 5 cable into the CE-700L's Remote

I/O port.

6. Plug one of the power adapters (supplied with this package)

into an AC source; plug the adapter's power cable into the

CE-700L's Power Jack

7. Plug the other end of the Cat 5 cable into the I/O port of the

Remote Unit (CE-700R).

8. Plug the cables from the remote console devices (mouse,

keyboard, monitor), into their ports on the Console side of the

CE-700R.

9. Plug the second power adapter (supplied with this package)

into an AC source; plug the adapter's power cable into the

CE-700R's Power Jack.

CE700.fm Page 9 Friday, November 10, 2006 1:52 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

ATEN CE-700 User Manual Page 9