ATEN CS-64A User Manual download pdf (Page 7)

Installation

Refer to the Installation diagram on the next page as you

perform the following steps:

1. Plug your keyboard, monitor, mouse into the appropriate

Console ports on the CS-64

A. Each port is labeled with an

appropriate icon to indicate itself.

2. (Optional) Plug your speakers into the CS-64A’s speaker

jack.

3. Plug the attached KVM cables’ keyboard, monitor, mouse,

and speaker connectors into their respective ports on the

computers you are installing.

After you have finished cabling up, turn on the power to the

computers.

Note: The CS-64A’s Power On default is to link to the first

computer you turn on.

- 5 -

Before you begin, make sure that power to all the

devices you will be connecting up have been

turned off. You must unplug the power cords of

any computers that have the Keyboard Power On

function. Otherwise, the switch will receive power

from the computer.

2. To prevent damage to your equipment, make sure

that all devices you will be connecting up are

properly grounded.

2003-08-26

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

ATEN CS-64A User Manual Page 7