ATEN CL1016 User Manual download pdf (Page 69)

Appendix

5. Slide the switch open and closed a couple of times to be sure that it is

properly aligned and operating smoothly. (See page 13 for opening and

closing procedures.)

6. After determining that the switch is properly lined up and operating

correctly, finish up by fully tightening down the partially tightened front

attachment screws inserted in step 3.

OSD Factory Default Settings

The factory default settings are as follows:

Dedicated Invocation Keys

Two dedicated keys are provided on the keyboard module to make it easy to

invoke Hotkey Mode and the OSD, as shown in the diagram, below

Note: These keys are toggles. Press once to invoke the feature, press again to

exit.

Setting Default

OSD Hotkey [Scroll Lock] [Scroll Lock]

Port ID Display Position Upper Left Corner

Port ID Display Duration 3 Seconds

Port ID Display Mode The Port Number plus the Port Name

Scan Duration 5 Seconds

Scan/Skip Mode All

Screen Blanker 0 (Disabled)

Logout Timeout 0 (Disabled)

Beeper Y (Activated)

Accessible Ports F (Full) For all Users on all Ports

1 2 ... 64 65 66 67 68 69 70 71 72 73

No comments

ATEN CL1016 User Manual Page 69