ATEN RS-485 User Manual download pdf (Page 16)

- 16 -

Peripherals Installation

1. After you have finished the software installation procedures

for your operating system and have connected the ATEN

USB-to-Serial Hub to your computer, connect the peripheral

device to the ATEN USB-to-Serial Hub and then turn the

peripheral on.

2. Follow the Installation Wizard’s on-screen instructions to

complete the installation.

Note: 1. This procedure only occurs the first time you connect

the peripheral. If your peripheral was previously

connected and configured for the COM port, after you

perform the adapter installation and click Finish, the

driver will connect it and install it automatically.

However, some peripheral devices, such as older

PDAs, require that you install the software for the

peripheral device before it will work properly.

2. Under Windows 2000, if you connect a modem, you

must specify it as a Standard Modem.

PORT 4

1 2 ... 11 12 13 14 15 16 17 18

No comments

ATEN RS-485 User Manual Page 16