ATEN RS-232 User Manual Page 1

VS481AUSER MANUALHDMI Switch

- 10 -IR Remote ControlNo. Component Function1 Port Up / Port Down ButtonsPress the Port Up button to cycle forward through the source devices (1 to 2

- 11 -InstallationInstallation of the VS481A is simply a matter of plugging in the appropriate cables. To install the switch, refer to the installatio

- 12 -Installation Diagram312Hardware / SoftwareControllerHDMI A/V Source DevicesHDMI Output Device4ORHDMI INHDMI INHDMI INHDMI OUT321

- 13 -Source Device SelectionThe VS481A HDMI Switch offers easy and flexible source device selection with either the front panel pushbuttons, with the

- 14 -RS-232 Serial InterfaceThe VS481A’s built-in bi-directional RS-232 serial interface allows system control through a high-end controller, PC, and

- 15 -Powering Off and RestartingIf you power off the VS481A, follows these steps before powering it on again:1. Power off the attached devices.2. Unp

- 16 -SpecificationsFunction VS481ADisplay Connections 1Connectors Device HDMI In 4 x HDMI Type A Female (Black)Display HDMI Out 1 x HDMI Type A Fema

- 17 -Limited WarrantyIN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, I

FCC InformationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

- 3 -VS481A User ManualOnline RegistrationYou can register your product at our online support center:Online SupportInternationalNorth AmericaInternati

- 4 -Package ContentsThe VS481A HDMI Switch package contains the following items: 1 VS481A HDMI Switch 1 IR Remote Control Unit 1 Power Adapter 1

- 5 -OverviewWith more and more HDMI devices entering the Home Theater market, the need for simultaneous access to different HDMI A/V sources is becom

- 6 -Features Allows up to four HDMI A/V sources to be connected to one HDMI display Toggle between A/V sources using remote control or front panel

- 7 -System RequirementsSource Devices(s) HDMI Type A output connector(s)Note: A DVI/HDMI adapter is required when connecting a DVI source device.Dis

- 8 -ComponentsVS481A Front ViewNo. Component Function1 HDMI In Plug the cable from an HDMI source device into this port (number 4).2 Port Selection

- 9 -VS481A Rear ViewNo. Component Function1 Power Jack The power adapter cable plugs in here.2 HDMI Out The cable from the HDMI display device plugs