ATEN CL-1200 User Manual download pdf (Page 32)

CL-1200 User Manual

Console Selection

Console selection on the CL-1200 is accomplished with hotkey combinations,

as described in the following table:

Note: 1. Press the keys in sequence - one key at a time. First [Ctrl], then [Alt],

then [Shift], etc.

2. Console selections are not saved. If the switch is powered off, it

reverts to the default setting of both consoles enabled when it is

powered on again.

3. If the KVM switch connected to the CL-1200 uses the [Ctrl] [Alt]

[Shift] combination to invoke its hotkey mode, you won't be able to

access any of its hotkey operations because the CL-1200 will capture

the combination for console selection first.

Port ID Numbering & Port Selection

Port ID numbering and Port Selection follow the method used by the KVM

switch connected to the CL-1200. Consult your KVM switch's User Manual for

details.

Combination Action

[Ctrl] [Alt] [Shift] [L] [Enter] Enable Local (LCD) console;

Disable Remote (external) console.

[Ctrl] [Alt] [Shift] [R] [Enter] Enable Remote (external) console’

Disable Local (LCD) console.

[Ctrl] [Alt] [Shift] [L] [R] [Enter] Enable both consoles (default).

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

No comments

ATEN CL-1200 User Manual Page 32