ATEN VS0801H User Manual download pdf (Page 13)

- 13 -

Source Device Selection

The VS0801H 8-port HDMI Switch offers easy and flexible source

device selection with either the front panel pushbuttons, with the

remote control, or through the RS-232 serial interface.

Note: Whenever the VS0801H is powered on, it automatically

selects the first port connected to a powered on source

device. You may choose one of the methods outlined

below to select a different port.

Manual Selection

To select a source device, press the pushbutton that corresponds

to the port it is connected to.

Note: The SELECTED LED (green) light indicates which port is

currently selected.

Remote Control Selection

To select a source device with the remote control, press the

number button that corresponds to the port it is connected to.

Alternatively, you may also cycle through the source devices by

pushing the Port Up and Port Down buttons on the remote control

unit.

 Use the Port Up button to select the next port in ascending

order (from left to right on the front view panel).

 Use the Port Down button to select the next port in

descending order (from right to left on the front view panel).

Note: 1. The maximum range of the remote control unit is 10

meters (30 ft)

2. Aim the remote control unit at the IR receiver located on

the front panel of the VS0801H. For optimum

performance, make sure there is a clear line-of-sight

between the remote control unit and the IR receiver.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

No comments

ATEN VS0801H User Manual Page 13