ATEN CL5816 User Manual download pdf (Page 19)

Chapter 2. Hardware Setup

Connecting Up

Refer to the installation diagram on the following page as you perform the

installation steps. The numbers in the diagrams correspond to the numbers of

the steps.

1. Plug the SPHD connector end of the KVM cable provided with this unit

into the CL3000's KVM port.

2. Plug the keyboard, monitor, and mouse connectors of the KVM cable into

their respective ports in the Console Section of the KVM switch.

3. Plug your external console keyboard, monitor, and mouse connectors into

their respective ports in the Console Section of the CL3000, located on the

unit’s back panel.

4. If you are using an external USB mouse or USB peripheral in your

installation, plug it into the USB port located on the CL3000’s front panel.

5. Plug the power cord into the CL3000's power socket and into an AC power

source.

6. Power up your KVM installation.

7. Turn on the power to CL3000.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 46 47

No comments

ATEN CL5816 User Manual Page 19