ATEN CS-1732 User Manual download pdf (Page 17)

Chapter 2

Hardware Setup

Cable Connection

To set up your CS1732A / CS1734A installation, refer to the installation

diagrams on the following pages, and do the following:

1. Plug your USB keyboard and USB mouse into the USB Ports located on

the unit's front panel.

2. Plug your monitor into the Console monitor port located on the unit's rear

panel and power on the monitor.

3. Plug your microphone and speakers into the Console microphone and

speaker jacks located on the unit's rear panel.

4. Using a KVM cable set (provided with this package), plug the custom

SPHD connector into any available KVM Port on the switch and plug the

accompanying microphone and speaker connectors into the KVM Port's

microphone and speaker jacks.

Note: 1. The connectors and jacks are color coded and marked with an

appropriate icon for easy installation.

2. Be sure that all the plugs are in the same KVM Port sockets (all

in Port 1, all in Port 2, etc.).

5. At the other end of the cable:

a) For PS/2 (see PS/2 Cable Connection, page 12), plug the keyboard,

mouse, video, microphone and speaker cables into their respective ports

on the computer.

(Continues on next page.)

1. Important safety information regarding the placement of this

device is provided on page 29. Please review it before

proceeding.

2. Make sure that the power to all devices connected to the

installation are turned off. You must unplug the power cords of

any computers that have the Keyboard Power On function.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 41 42

No comments

ATEN CS-1732 User Manual Page 17