ATEN CS661 User Manual download pdf (Page 9)

- 9 -

Installation

Setting up the CS661 is quick and easy, offering simple plug and

play functionality in just a few short steps. Numbers 1–3 below

refer to the diagram on the following page:

1. Connect the shorter (0.9 m) USB cable with the yellow

connector to a USB port on the Local computer.

2. Connect the longer (1.8 m) USB cable with the blue

connector to a USB port on the Remote computer.

3. Connect your USB peripheral device to the USB 2.0 port on

the CS661 (optional).

4. When the two computers are connected, the software will

auto run on the Local computer.

Note: You may be prompted to reboot the Local computer

after the software has been installed, but this is

unnecessary – you do not need to reboot.

5. On the Remote computer, an AutoPlay window appears. Click

on Run ATEN_CS661.exe. In a few seconds, you will see a

message saying that the Remote computer is running.

6. The Remote desktop appears in a window on the Local

computer’s screen. The Local console (keyboard, monitor,

and mouse) now has full KVM control of the Remote

computer.

1. Make sure that all devices you will be installing are

properly grounded.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

ATEN CS661 User Manual Page 9