ATEN ALTUSEN KL1516 User Manual download pdf (Page 56)

KL1508 / KL1516 User Manual

When Hotkey Mode is active:

 The Caps Lock, and Scroll Lock LEDs flash in succession to indicate so.

They stop flashing and revert to normal status when you exit Hotkey

Mode.

 A Command Line appears on the monitor screen. The command line

prompt is the word Hotkey: in yellow text on a blue background, and

displays the subsequent Hotkey information that you key in.

 Ordinary keyboard and mouse functions are suspended - only Hotkey

compliant keystrokes (described in the sections that follow), can be input.

 At the conclusion of some hotkey operations, you automatically exit

hotkey mode. With others, you must exit manually by pressing [Esc] or

[Spacebar].

Selecting the Active Port

Each Computer Port is assigned a Port ID (see Port ID Numbering, page 28).

You can directly access any computer on the installation with a Hotkey

combination that specifies the Port ID of the port it is connected to. The steps

involved are:

1. Invoke Hotkey Mode (see page 45).

2. Key in the Port ID

The Port ID numbers display on the Command Line as you key them in. If

you make a mistake, use [Backspace] to erase the wrong number.

3. Press [Enter]

After you press [Enter], the KVM focus switches to the designated

computer and you automatically exit Hotkey Mode.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 95 96

No comments

ATEN ALTUSEN KL1516 User Manual Page 56