ATEN CS-1762 User Manual download pdf (Page 27)

4. Hotkey Operation

Hotkey Setting Mode

Hotkey Setting Mode is used to set up your CS-1762 / CS-1764 switch

configuration. All operations begin with invoking Hotkey Setting Mode

(HSM).

Invoking HSM

To invoke HSM do the following:

1. Press and hold down the Num Lock key

2. Press and release the minus key

3. Release the Num Lock key

Note: 1. There is an alternate key combination to invoke HSM. See below for

details.

2. The minus key must be released within one half second, otherwise

Hotkey invocation is canceled.

When HSM is active, the Caps Lock, and Scroll Lock LEDs flash in succession

to indicate that HSM is in effect. They stop flashing and revert to normal status

when you exit HSM.

Ordinary keyboard and mouse functions are suspended - only Hotkey

compliant keystrokes and mouse clicks (described in the sections that follow),

can be input.

At the conclusion of some hotkey operations, you automatically exit hotkey

mode. With some operations, you must exit manually. To exit HSM manually,

press the Esc key, or the Spacebar.

cs1762.book Page 17 Friday, February 17, 2006 10:21 AM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

No comments

ATEN CS-1762 User Manual Page 27