ATEN CS-914 User Manual download pdf (Page 4)

Hardware Requirements

Console

One VGA, SVGA, or Multisync monitor capable of the highest

resolution that you will be using on any computer in the installation

One PS/2 Mouse

One PS/2 Style Keyboard, or AT Style Keyboard plus a keyboard

adapter

Computers

The following equipment must be installed on each computer that is to be

connected to the system:

A VGA, SVGA or Multisync card.

A 6-pin mini-DIN (PS/2 style) mouse port.

Either a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on

pin 4 and Ground on pin 3, or a 5-pin DIN (AT Style) keyboard port

with +5V DC on pin 5 and ground on pin 4.*

* See the note under Cables in the next section.

Cables

Although it is possible to use standard KVM cables to connect the

computers to the Master View CS-914, for optimum signal integrity and to

simplify the layout, we strongly recommend that you use high quality CS

Custom Cables (Part Number 2L-1001P/C).

Note: The keyboard and mouse cables have PS/2 style connectors at

each end:

If your computer uses a standard AT style keyboard socket, you will

need a PS/2-to-AT keyboard adapter (purchased separately), in

order to plug the cable into the computer’s keyboard port.

The Master View CS-914 only supports PS/2 style mice - it does not

support serial mice.

- 3 -

2001 - 02 -07

1 2 3 4 5 6 7 8 9 ... 14 15

No comments

ATEN CS-914 User Manual Page 4