ATEN PN7212 User Manual download pdf (Page 85)

Chapter 7. Device Management

SNMP Trap Receivers

Up to four SNMP management stations can be specified. If you want to use

SNMP trap notifications, do the following:

1. Check Enable SNMP Trap.

2. Select the SNMP protocol from the three options provided.

3. Key in the IP address(es) and the service port number(s) of the

computer(s) to be notified of SNMP trap events. The valid port range is

1–65535. The default port number is 192.

Note: Make sure that the port number you specify here matches the port

number used by the SNMP receiver computer.

4. If SNMP v1 or SNMP V2C are selected, type in the community name(s) in

the Community field that corresponds to each of the stations.

Note: MIB definitions for the PN7212 / PN7320 are provided on the CD that

came with the package, or can be downloaded from the ATEN website.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 170 171

No comments

ATEN PN7212 User Manual Page 85