ATEN CL5816 User Manual download pdf (Page 27)

Chapter 3. Operation

Hotkeys

Console selection on the CL3000 is accomplished with hotkey combinations,

as described in the following table:

Note: 1. Press the keys in sequence – one key at a time. First [Ctrl], then [Alt],

then [Shift], etc.

2. Console selections are not saved. If the CL3000 is powered off, it

reverts to the default setting of both consoles enabled when it is

powered on again.

3. If the KVM switch connected to the CL3000 uses the [Ctrl] [Alt]

[Shift] combination to invoke its hotkey mode, you won't be able to

access any of its hotkey operations because the CL3000 will capture

the combination for console selection first.

Combination Action

[Ctrl] [Alt] [Shift] [P] [C] [Enter] To select normal mode (pc, etc.).

[Ctrl] [Alt] [Shift] [S] [U] [N] [Enter] To select SUN

[Ctrl] [Alt] [Shift]

[u] [p] [g] [r] [a] [d] [e] [Enter]

Activates the Firmware Upgrade Mode.

Note: this Hotkey sequence only works when the

Firmware Upgrade Recovery Switch (see page 22)

is in the Normal position.

[Ctrl] [Alt] [Shift] [L] [Enter] Enable Local (LED-backlit LCD) console;

Disable Remote (external) console.

[Ctrl] [Alt] [Shift] [R] [Enter] Enable Remote (external) console

Disable Local (LED-backlit LCD) console.

[Ctrl] [Alt] [Shift] [L] [R] [Enter] or

[Ctrl] [Alt] [Shift] [R] [L] [Enter]

Enable both consoles (default).

[Ctrl] [Alt] [Shift] [U] [M] [Enter] Configures the front USB Port to mouse mode

(Mouse functionality is immediate upon switching to

USB mouse mode).

[Ctrl] [Alt] [Shift] [U] [P] [Enter] Configures the front USB Port to peripheral mode.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 46 47

No comments

ATEN CL5816 User Manual Page 27