Troubleshooting
Symptom Possible Cause Action
Keyboard
and/or Mouse
Not
Responding
Loose cables. Check cable connections to make sure
they are completely seated in their
sockets.
Keyboard/Mouse
needs to be reset.
Unplug the keyboard/mouse from the
Console Keyboard Port, then plug it
back in.
Switch needs to be
reset
Turn off the computers. Unplug the
KVM cables. Wait five seconds; then
plug the cables back in and turn the
computers on.
Switch is in Auto Scan
Mode.
Press the [Spacebar] to exit Auto Scan
Mode.
Selected port
connects to a
powered Off computer.
Resend the Hotkey command
selecting a port that has a powered On
computer attached.
Hotkey sequence
input incorrectly.
Resend the Hotkey command - press
and release each key in the sequence
individually.
Video
Problems
Resolution and/or
Bandwidth set too high.
Select a lower resolution and/or
bandwidth.
- 16 -
2003-09-30
Comments to this Manuals