ATEN CS-62U User Manual download pdf (Page 7)

Installation

Refer to the Installation diagram on the next page as you

perform the following steps:

1. Plug your keyboard, monitor, mouse, into their respective

ports on the CS-62U. The keyboard and mouse ports are

labeled with an icon to indicate which is which.

2. Plug your speakers into the speaker jack on the CS-62U.

3. Plug the USB, video, and speaker connectors of the

attached KVM cables into their respective ports on the

computers you are installing.

Note: The computer attached to the cable with one dot at its

base is the Port 1 computer; the computer attached to

the cable with two dots at its base is the Port 2

computer (see p. 8 for hotkey port selection).

4. Turn on the power to the computers.

Note: The CS-62U’s Power On default is to link to the first

computer you turn on.

- 5 -

1. Before you begin, make sure that power to all the

devices you will be connecting up have been

turned off. You must unplug the power cords of

any computers that have the Keyboard Power On

function. Otherwise, the switch will receive power

from the computer.

2. To prevent damage to your installation due to

ground potential difference, make sure that all

devices on the installation are properly grounded.

2003-09-30

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

ATEN CS-62U User Manual Page 7