ATEN CS-1762 User Manual download pdf (Page 17)

Chapter 3

Basic Operation

Manual Switching

There are two convenient methods to access the computers: Manual – which

involves pressing the push button port selection switches located on the unit’s

front panel; and Hotkey – which involves entering combinations from the

keyboard. Hotkey port selection is discussed in the next chapter.

For manual port selection:

 Press and release a port selection switch to bring the KVM focus to the

computer attached to its corresponding port. The USB and Audio focus

does not change – they stay with the port that they are already on.

 Press and hold a port selection switch for more than 2 seconds to bring the

KVM focus, plus the USB and Audio focus to the computer attached to its

corresponding port.

 Press and hold port selection switches 1 and 2 for more than 2 seconds to

start Auto Scan Mode, see page 13 for details.

 Press and release either port selection switch to stop Auto Scan Mode. The

KVM focus goes to the computer attached to the corresponding port of the

switch you pressed.

Hot Plugging

The CS1762 / CS1764 supports USB hot plugging – components can be

removed and added back into the installation by unplugging their cables from

the USB hub ports without the need to shut the unit down.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

No comments

ATEN CS-1762 User Manual Page 17