ATEN PN5212 User Manual download pdf (Page 89)

Chapter 7. Device Management

OOBC

In case the LAN that the Power Over the NET™ device resides on goes down,

or the it cannot be accessed with the usual browser based method for some

other reason, the device can be accessed via an Out of Band method utilizing

its Console.

The OOBC page is used to set up the serial configuration parameters for serial

terminal Out of Band access to the Power Over the NET™ device, as described

in the section that follows.

 To operate the PN5212 / PN5320 from a local computer's console terminal

(HyperTerminal, GTKTerminal, etc.), connect the PN5212 / PN5320’s

Console port to the COM port of a local computer (see Single Stage

Installation, page 11, and Console Terminal Session, page 105).

Console Port Settings

For serial terminal operation, this section sets the serial parameters of the

Power Over the NET™ device’s Console port.

Note: The Console port’s serial parameters and the parameters of the device it

connects to must both be the same.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 152 153

No comments

ATEN PN5212 User Manual Page 89