ATEN KL1100 User Manual download pdf (Page 21)

Chapter 2. Hardware Setup

To rack mount the KL1100, do the following:

1. While one person positions the KL1100 in the rack and holds it in place,

the second person loosely screws the front brackets to the rack.

2. While the first person still holds the KL1100 in place, the second person

slides the L brackets into the KL1100's side mounting brackets from the

rear until the bracket flanges contact the rack, then screws the L brackets

to the rack.

3. After the L brackets have been secured, tighten the front bracket screws.

Note: Allow at least 5.1 cm on each side for proper ventilation, and at least

12.7 cm at the back for the power cord and cable clearance.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

No comments

ATEN KL1100 User Manual Page 21