ATEN CS-1732 User Manual download pdf (Page 33)

Upgrade Succeeded

After the upgrade has completed, a screen appears to inform you that the procedure was

successful.

To complete the upgrade:

Click Finish to close the Firmware Upgrade Utility.

2. Power off the switch by unplugging the KVM cable that you connected in step 6 of

Before You Begin (see p. 23), from the back of the switch.

3. Remove the Firmware Upgrade Cable.

4. Slide the Firmware Upgrade Switch to the Normal position.

5. Connect all the KVM cables.

6. If you are using a power adapter, plug its cable back in.

Upgrade Failed

If the Upgrade Succeeded screen doesn’t appear, it means that the upgrade failed to

complete successfully, in which case you should repeat the upgrade procedure from the

beginning.

2005-12-21

The Firmware Upgrade Utility

1 2 ... 28 29 30 31 32 33 34 35 36 37

No comments

ATEN CS-1732 User Manual Page 33