ATEN CS-72E User Manual download pdf (Page 19)

2. Hardware Setup

Installation

Refer to the installation diagrams on the next page (the numbers in the

diagrams correspond to the steps indicated below) as you do the following:

1. Plug the Console Adapter Cable into the Console Port Connector on the

rear panel of the switch.

2. Plug your keyboard, monitor and mouse into their respective connectors

on the Console Adapter Cable. The connectors are color coded and marked

with an appropriate icon for easy identification.

3. Use the custom KVM cable sets (described in the Cables section, page 3),

to connect the CS-74E KVM Ports to the monitor, keyboard and mouse

ports of the computers you are installing.

4. If you choose to use external power, plug the power adapter into an AC

power source, then plug the power adapter cable into the unit's Power

Jack.

Note: Under ordinary circumstances the switch doesn't require external

power. If, for some reason, you find that the quality deteriorates

(when using long cables, for example), you may want to add a power

adapter. The power adapter should be DC9V; 300mA, with the

inside positive and the outside negative:

5. Turn on the power to the computers.

Note: The CS-74E's default is to link to the first computer you turn on.

1. Important safety information regarding the placement of this

device is provided on page iv. Please review it before proceed-

ing.

2. Make sure that power to all the devices you will be connecting

up have been turned off. You must unplug the power cords of

any computers that have the Keyboard Power On function.

c724e.book Page 9 Friday, January 27, 2006 10:26 AM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

ATEN CS-72E User Manual Page 19