ATEN VS0401 User Manual download pdf (Page 19)

Chapter 3. Operation

RS-232 Serial Interface

The VS0201 / VS0401’s built-in bi-directional RS-232 serial interface allows

system control through a high-end controller, PC, and/or home automation /

home theater software package.

Configuring the Serial Port

The controller’s serial port should be configured as follows:

The RS-232 control commands for Switch Port, Auto Switch, Power on

Detection, Dynamic DDC, Pushbutton Lock, Read Firmware and Reset are

found on the pages that follow.

Verification

In the steps below, after entering a command, a verification message appears

at the end of the command line as follows:

 Command OK - indicates that the command is correct and successfully

performed by the switch

 Command incorrect - indicates that the command has the wrong format

and/or values.

Baud Rate 19200

Data Bits 8

Parity None

Stop Bits 1

Flow Control None

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

No comments

ATEN VS0401 User Manual Page 19