ATEN CS-228 User Manual download pdf (Page 21)

(F6 Settings cont.)

Setting

Function

CHANNEL DISPLAY

POSITION

Allows you to position where the Port ID appears on the screen.

Highlight this item, then press [Enter]; use the Mouse or the Arrow

Keys to position the Port ID display, then Double Click or press

[Enter] to lock the position and return to the Set submenu.

SCAN MODE Selects which Ports are available for scanning. There are six

choices: ALL - All the Ports which have been set Accessible (F5);

QVIEW - Only those Ports which have been set Accessible (F5) and

have been selected for Quick View Scanning (F7); POWERED ON -

Only those Ports which have been set Accessible (F5) and are

Powered On; POWERED ON + QVIEW - Only those Ports which

have been set Accessible (F5) and have been selected for Quick

View Scanning (F7) and are Powered On; QVIEW + NAME - Only

those Ports which have been set Accessible (F5) and have been

selected for Quick View Scanning (F7) and have been named (F2);

NAME - Only those Ports which have been set Accessible (F5) and

have been named (F2).

SCAN DURATION Determines how long the display dwells on each port when it cycles

through the selected ports in Quick View Scan Mode. Key in a value

from 1 - 255 seconds, then press [Enter]. Default is 3 seconds.

PRIVATE MODE The [Enter] key is a toggle that Enables/Disables Private Mode for

the currently selected port. When Private Mode is Enabled, the other

Console cannot access the port, and its monitor shows a blank

screen when it comes to it. If the other console tries to access the

port, the message: Private Mode: Console x (x represents the

number of the Console that has set private mode), displays on its

screen. When you have finished making your selections, press [Esc]

to return to the OSD Main Menu.

RESTORE DEFAULT

VALUES

This function is used to undo all User changes and return the setup

to the original factory default settings - except for the Names that

were assigned to Ports, which are retained.

MOUSE BUTTON SETUP This function allows you to set the mouse for right or left handed

operation. Use [Enter] to toggle between the two.

SET PASSWORD This function is for Users to set their passwords:

1. When you access this function, if you already have a password

you must enter it in order to continue.

2. A screen appears that allows you to key in your new password.

The password may be up to 8 characters long, and can

consist of any combination of letters and numbers (A - Z, 0 - 9).

3. To modify or delete a previous password, use [Backspace] to

delete the characters.

4. Key in the password, then press [Enter]. You are asked to key the

password in again, in order to confirm that it is correct. Key in the

new password again, then press [Enter].

If the two entries match, the new password is accepted. If the entries

do not match, you must start again from the beginning.

2001-02-01

CS-228 User Manual 17

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

ATEN CS-228 User Manual Page 21

Comments to this Manuals

Related products and manuals for Network switches ATEN CS-228