ATEN CS-228 User Manual download pdf (Page 22)

F7 QV

You can broaden or narrow the number of ports that get automatically scanned by

selecting only the ones you want with the QV (Quick View Scan) function. [F7] is a

toggle that selects or deselects the currently highlighted port for the Quick View

Scanning function (see F4, above). To select/deselect a port for Quick View Scanning:

1. Double Click the port you want, or use the Navigation Keys to move the highlight

bar to it.

2. Press [F7].

When a port has been selected for Quick View Scanning, an arrowhead displays in the

QV column to indicate so. When a port is deselected, the arrowhead disappears.

F8 Out

Clicking the F8 field, or pressing [F8] logs you out of OSD control of the computers,

and blanks the Console screen. This is different from simply pressing [Esc] to

deactivate the OSD, since with this function you must log in all over again to regain

access to the OSD.

Note: 1. When you reenter the OSD after logging out, the screen stays blank except

for the OSD Main Menu. You must input your password before you can

continue.

2. If you reenter the OSD after logging out, and immediately use [Esc] to

deactivate the OSD without having selected a port from the OSD menu, a

Null Port message displays on the screen, and the system reverts to Logout

status.

Factory Default Settings

The factory default settings are as follows:

Setting Default

MULTIUSER MODE Enabled

ACCESS TIMEOUT 10 Seconds

OSD HOTKEY [Ctrl] [Ctrl]

DISPLAY MODE The Port Number plus the Port Name

DISPLAY DURATION 3 Seconds

SCAN DURATION 3 Seconds

2001-02-01

18 CS-228 User Manual

1 2 ... 17 18 19 20 21 22 23 24 25 26

No comments

ATEN CS-228 User Manual Page 22