ATEN CS-1008 User Manual download pdf (Page 18)

CL1008 / CL1016 User Manual

To rack mount the switch, do the following:

1. While one person positions the switch in the rack and holds it in place, the

second person loosely screws the front brackets to the rack.

2. While the first person still holds the switch in place, the second person

slides the L brackets into the switch's side mounting brackets, from the

rear until the bracket flanges contact the rack, then screws the L brackets

to the rack.

3. After the L brackets have been secured, tighten the front bracket screws.

Note: Allow at least 5.1 cm on each side for proper ventilation, and at least

12.7 cm at the back for the power cord and cable clearance.

cl1008-1016.book Page 8 Thursday, January 20, 2011 5:24 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 72 73

No comments

ATEN CS-1008 User Manual Page 18