ATEN CS-1008 User Manual download pdf (Page 36)

CL1008 / CL1016 User Manual

F3: SET

This function allows the administrator and each user to set up their own,

individual, working environment. A separate profile for each is stored by the

OSD and is activated according to the username provided during login.

To change a setting:

1. Double click it; or move the highlight bar to it, then press [Enter].

2. After you select an item, a submenu with further choices appears. To make

a selection, either double click it; or move the highlight bar to it, then press

[Enter]. An icon appears before the selected choice to indicate which one

it is. The settings are explained in the following table:

(Continues on next page.)

Setting Function

OSD HOTKEY Selects which hotkey activates the OSD function:

[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].

Since the [Ctrl] key combination may conflict with programs running

on the computers, the default is the [Scroll Lock] combination.

PORT ID

DISPLAY

POSITION

Allows you to position where the port ID appears on the monitor.

The default is the upper left corner, but you can have it appear

anywhere on the screen.

Use the mouse or the arrow keys to position the port ID display,

then click or press [Enter] to lock the position and return to the Set

submenu.

PORT ID

DISPLAY

DURATION

Determines how long a port ID displays on the monitor after a port

change has taken place. The choices are: User Defined – which

lets you select the amount of time (from 1–255 sec.); and Always

On – which displays the port ID at all times. If you select User

Defined, key in the number of seconds, then press [Enter]. The

default is 3 Seconds. A setting of 0 (zero) disables this function.

cl1008-1016.book Page 26 Thursday, January 20, 2011 5:24 PM

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 72 73

No comments

ATEN CS-1008 User Manual Page 36