ATEN CS-1008 User Manual download pdf (Page 50)

CL1008 / CL1016 User Manual

Hotkey Beeper Control

The beeper can be hotkey toggled on and off (see ACTIVATE BEEPER,

page 29). To toggle the beeper, key in the following hotkey combination:

1. Invoke Hotkey mode (see page 35).

2. Press [B]

After you press B, the beeper toggles on or off. The command line displays

Beeper On or Beeper Off for one second; then the message disappears and you

automatically exit Hotkey mode.

Hotkey Summary Table

[Num Lock] + [-] [Port ID] [Enter] Switches the KVM focus to the computer that

corresponds to that port ID

[T] [n] [Enter] Sets the Auto Scan interval to n seconds – where

n is a number from 1–255.

[A] Invokes Auto Scan mode.

 When Auto Scan mode is in effect, [P] or left

click pauses auto scanning.

 When auto scanning is paused, pressing P or

left clicking again resumes auto scanning.

Note: Pressing almost any of the typewriter keys

(letters, numbers, Enter, Esc, Spacebar, etc.), will

resume scanning.

[←] Skips from the current port to the first accessible

port previous to it. (See SCAN/SKIP MODE, p. 27,

for information regarding accessible ports.)

[→] Skips from the current port to the next accessible

port.

[↑] Skips from the current port to the last accessible

port of the previous station. If you are at a port on

the first station you cycle backward to the last

accessible port on the last station.

[↓] Skips from the current port to the first accessible

port of the next station. If you are at a port on the

last station you cycle forward to the first accessible

port on the first station.

[B] Toggles the beeper on or off.

cl1008-1016.book Page 40 Thursday, January 20, 2011 5:24 PM

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 72 73

No comments

ATEN CS-1008 User Manual Page 50