ATEN CS-1008 User Manual download pdf (Page 26)

CL1008 / CL1016 User Manual

Powering Up

Power up the installation according to the following procedure:

1. Power on the first station (CL1008 / CL1016) and wait a few seconds for

the unit to ascertain its station ID.

2. Plug in the power adapters for each daisy chained station on the

installation in turn (second station, then third station, etc.).

Each ACS1208A / ACS1216A has a LED display on its front panel to

indicate its station ID (the station ID for the first stage unit is 01, the ID for

the second stage unit is 02, the ID for the third stage unit is 03, etc.).

In each case, wait for the station ID to be ascertained and displayed on the

station ID LED before plugging in the next station.

3. After all the stations are up, power on the computers.

Powering Off and Restarting

If it becomes necessary to power off the CL1008 / CL1016, or if the switch

loses power and needs to be restarted, wait 10 seconds before powering it back

on. The computers should not be affected by this, but if any of them should fail,

simply restart the affected computers.

cl1008-1016.book Page 16 Thursday, January 20, 2011 5:24 PM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 72 73

No comments

ATEN CS-1008 User Manual Page 26