ATEN ALTUSEN PN9108U User Manual download pdf (Page 22)

PN9108U User Manual

Single Stage Installation

In a Single Stage installation, there are no additional PN9108U Stations daisy

chained down from the first unit. To set up a single stage installation, refer to

the installation diagram on the following page (the numbers in the diagram

correspond to the numbered steps), and do the following:

1. For each device, use an AC Output cable to connect from any available

PN9108U output port to the device's AC socket.

2. Safe Shutdown is supported for computers running Windows 98SE, ME,

NT, 2000, XP, and 2003 Server.

If you choose to utilize the Safe Shutdown feature (use of this feature is

optional), for each computer use a Safe Shutdown cable to connect from

the PN9108U's Safe Shutdown port to the computer's Serial port.

Note: You must connect the computer to the same letter designation for

both the AC Outlet and Safe Shutdown port.

3. Plug the LAN or WAN cable into the PN9108U's RJ-45 socket.

4. If you choose to use a UPS, or a modem or PC for OOB operation, connect

its serial port to the PN9108U's RS-232 port.

5. Use the AC power cord provided with this package to connect the

PN9108U's Power Socket to an AC power source. See p. 52 for power

cord safety information.

Note: We strongly advise that you do not plug the PN9108U into a multi

socket extension cord, since it may not receive enough amperage to

operate correctly.

Once you are cabled up, you can turn on the PN9108U and the connected

devices.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 77 78

No comments

ATEN ALTUSEN PN9108U User Manual Page 22