ATEN CS-1008 User Manual download pdf (Page 69)

Appendix

5. Slide the switch open and closed a couple of times to be sure that it is

properly aligned and operating smoothly. (See page 13 for opening and

closing procedures.)

6. After determining that the switch is properly lined up and operating

correctly, finish up by fully tightening down the partially tightened front

attachment screws inserted in step 3.

OSD Factory Default Settings

The factory default settings are as follows:

Setting Default

OSD Hotkey [Scroll Lock] [Scroll Lock]

Port ID Display Position Upper Left Corner

Port ID Display Duration 3 Seconds

Port ID Display Mode The Port Number plus the Port Name

Scan Duration 5 Seconds

Scan/Skip Mode All

Screen Blanker 0 (Disabled)

Logout Timeout 0 (Disabled)

Beeper Y (Activated)

Accessible Ports F (Full) For all Users on all Ports

cl1008-1016.book Page 59 Thursday, January 20, 2011 5:24 PM

1 2 ... 64 65 66 67 68 69 70 71 72 73

No comments

ATEN CS-1008 User Manual Page 69