ATEN KN1108v User Manual download pdf (Page 120)

KVM Over the NET™ User Manual

104

Blade Servers – Connections Page

Blade Servers that are connected to the switches

display below the KVM switches and PON

devices in the Sidebar.

This section describes accessing and configuring

the blade servers, and associating the blades with

KVM switch ports. By associating a blade server

or blade with a port the servers and blades are

integrated into the Sidebar tree view, and appear

as devices connected to the port.

The Blade Configuration Page

The Blade Configuration page is where the

associations between the blade servers and the

KVM switch ports get made. To access this page,

select the blade server or blade, then click Blade

Configuration (the menu item at the far right of

the menu bar).

For IBM and Dell blade servers, the entire chassis

gets associated with a port, and each blade in the

chassis will appear in the tree as a child port of the

associated port – as in port 08 in the screenshot at

the right.

For HP blade servers, associations are made on a

blade by blade basis. Each blade is associated

with a single port.

To access a blade, click on its port entry in the tree.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 283 284

No comments

ATEN KN1108v User Manual Page 120