ATEN KN1108v User Manual download pdf (Page 280)

100

101

KVM Over the NET™ User Manual

264

Clear Login Information

If you are unable to perform an Administrator login (because the Username and

Password information has become corrupted or you have forgotten it, for

example) you can clear the login information with the following procedure.

Note: Performing this procedure also returns all settings to their defaults.

To clear the login information (and return all settings to their defaults), do the

following:

1. Power off the KVM Over the NET™ switch and remove its housing.

2. Use a jumper cap to short the mainboard jumper labeled J6.

3. Power on the switch.

4. When the Link and 10/100Mbps LEDs flash, power off the switch.

5. Remove the jumper cap from J6.

6. Close the housing and start the KVM Over the NET™ switch.

After powering on the unit, you can use the default Super Administrator

Username and Password (see First Time Setup, page 29), to log in.

1 2 ... 275 276 277 278 279 280 281 282 283 284

Comments to this Manuals

No comments

ATEN KN1108v User Manual Page 280

Comments to this Manuals

Related products and manuals for Network switches ATEN KN1108v