ATEN KN1108v User Manual download pdf (Page 194)

KVM Over the NET™ User Manual

178

Blade Server Setup

Adding a Blade Server

To configure a new blade server, do the following:

1. Select its icon in the Sidebar, then click Add in the main panel. The Setup

Blade Server dialog box comes up, with the Step 1 tab displayed:

2. Fill in the fields according to the information provided in the table, below:

Field Explanation

Server Model Drop down the list to select the blade server chassis model. If

your model isn’t included in the list of supported servers, contact

your dealer for help.

Include KVM This item is for information purposes and can’t be edited. If the

server supports a KVM function, this box is checked. Otherwise,

it is unchecked.

Server Name For convenience, you can give the server a name.

Server IP Key in the server’s IP address (IPv4, IPv6, or domain name)

used to access the server via a serial connection (Telnet or

SSH)

Service Port Key in the port number used for serial access.

User Name Key in the username required for serial access authentication.

Password Key in the password required for serial access authentication.

Scan Interval

The interval between times that the KN1108v / KN1116v switch

scans the server for information.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 283 284

No comments

ATEN KN1108v User Manual Page 194