ATEN KN1108v User Manual download pdf (Page 45)

Chapter 3

Super Administrator Setup

Overview

This chapter discusses the administrative procedures that the Super

Administrator performs to get the KN1108v / KN1116v set up for the first time.

First Time Setup

Once the KN1108v / KN1116v has been cabled up, the Super Administrator

needs to set the unit up for user operation. This involves setting the network

parameters, and changing the default Super Administrator login. The most

convenient way to do this for the first time is from the local console, though it

can also be done remotely.

Note: For remote methods of setting up the network, see IP Address

Determination, page 244.

After the local console has been connected (see Single Stage Installation,

page 19), and the KN1108v / KN1116v turned on, a login prompt appears on

the console monitor:

Since this is the first time you are logging in, use the default Username:

administrator; and the default Password: password.

Note: For security purposes, you should change these to a unique Username

and Password. (See Changing the Super Administrator Login, page 32

for details.)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 283 284

No comments

ATEN KN1108v User Manual Page 45