ATEN KN1108v User Manual download pdf (Page 260)

KVM Over the NET™ User Manual

244

IP Address Determination

If you are an administrator logging in for the first time, you need to access the

KVM Over the NET™ switch in order to give it an IP address that users can

connect to. There are three methods to choose from. In each case, your client

computer must be on the same network segment as the KVM Over the NET™

switch. After you have connected and logged in you can give the KVM Over

the NET™ switch its fixed network address. (See Network, page 148.)

The Local Console

The easiest way to assign an IP address is from the local console. Refer to First

Time Setup, page 29, for details on the procedure involved.

IP Installer

For client computers running Windows, an IP address can be assigned with the

IP Installer utility. The utility can be obtained from the Download area of our

website. Look under Driver/SW, and the model of your switch. After

downloading the utility to your client computer, do the following:

1. Unzip the contents of IPInstaller.zip to a directory on your hard drive.

2. Go to the directory that you unzipped the IPInstaller program to and run

IPInstaller.exe. A dialog box similar to the one below appears:

1 2 ... 255 256 257 258 259 260 261 262 263 264 265 ... 283 284

No comments

ATEN KN1108v User Manual Page 260