ATEN ALTUSEN PN9108U User Manual download pdf (Page 116)

SN3101 User Manual

106

S Register Support

The S registers that the SN3101 supports, and their values, are described in the

table, below:

S0 Number of rings to wait before auto

answering.

0—255 Rings 0

S1 Ring Counter

Specify the current number of rings. S1 is

incremented each time the modem detects

a ring signal on the telephone line. S1 is

cleared when the existing connection is

established, or when it is dropped.

0—255 Rings 0

S2 Escape Character

If this value is greater than 127, the escape

process is disabled.

0—127 ASCII 43

S3 Carriage Return Character

Sets the value of the carriage return

character used when displaying commands

or results.

0—127 ASCII 13

S4 Line Feed Character

Sets the character recognized as the line

feed when displaying commands or results.

If verbose result code format is in use, the

line feed character is output after the

carriage return character.

0—127 ASCII 10

S5 Backspace Character

Sets the character recognized as a

backspace. Used to erase the last character

typed on the command line.

0—32 ASCII 8

S12 Escape Prompt Delay

The amount of time required before and

after an escape sequence (+++) is entered

in order for the modem to transition from

data mode to command mode.

0—255 0.02ms 50

(1 sec.)

S25 DTR Delay and Asynchronous/Synchronous

Time Delay

The amount of time that the modem will

delay before taking the action specified by

the AT&Dn command.

0—255 0.01s for DTR

1s for

asynchronous

mode

sn3101.book Page 106 Monday, January 19, 2009 3:37 PM

1 2 ... 111 112 113 114 115 116 117 118 119 120 121

Comments to this Manuals

No comments

ATEN ALTUSEN PN9108U User Manual Page 116

Comments to this Manuals

Related products and manuals for Power supply units ATEN ALTUSEN PN9108U